Home > Product > Hydraulic Inground Car Lift > Hydraulic Inground Car Lift 2 post

    Hydraulic Inground Car Lift 2 post

  • Category:
    Hydraulic Inground Car Lift
  • Browse number:
  • Release time:
    2019-06-20 15:23:16

Hydraulic Inground Car Lift 2 post for car repair:

Hydraulic Inground Car Lift 2 post

The scissor-shaped concealed ultra-thin structure takes up little space and does not require a foundation foundation for construction. Imported hydraulics\two sets of differential cylinders, pneumatic and electrical components, the equipment runs smoothly.

Pneumatic wide-tooth self-locking insurance and anti-burst device are safe and reliable.

Easy tire removal and chassis overhaul.

It can be upgraded to an extended platform structure for a variety of models.

The scissor lifts mainly include the Scissor Hydraulic Inground Car Lift, the ultra-thin small-cut car lift and the large-cut car lift. The Scissor Car Lift has a moderate lifting speed and does not occupy the pit position, which is relatively fixed for some models. The field of work with high work intensity is undoubtedly the best choice. Introduce the operation and maintenance points of the scissor lift.

1. Installation requirements

The ground plane for the two platforms of the Scissor Car Lift is at the same level. This is because the mechanical safety of the large and small scissor lifts is synchronized with the upper and lower ends of the cylinders. Only in this way can the same base be locked. In the position, the two lift platforms are at the same level.

2. Lowering operation

When the operation is down, some manufacturers have the function of falling delay. You can directly press the down button. Some manufacturers have no falling delay function in the electronic control part. You must press the up button first, and then press the safety gear to release the locking position. Drop button.

3. Maintenance

Scissor Car Lift mostly uses differential cylinder to ensure the synchronization of the main and auxiliary platforms. It uses the volume of the upper chamber of the master cylinder and the lower chamber of the auxiliary cylinder to achieve synchronization. For the manual oil-filled scissor lift, the leakage of the manual ball valve seal may be caused. Or leakage inside the main/sub-cylinder, causing the main/sub-platform to be out of sync. The ball valve should be opened to actively replenish the oil. If the replenishment is too frequent (interval less than one month), the hydraulic system should be checked to replace the cylinder seal or ball valve; For oil replenishment, the two-way solenoid valve spool should be checked first, and then the cylinder should be inspected.

4. Security check

The connection end of the Scissor Car Lift bracket must be checked regularly. If the circlip is loose and the fastener is loose, it must be tightened in time. In the past two years, most manufacturers have adopted self-locking locknuts, and the external brackets have been replaced with closed-loop connections to reduce the influence of the rollover force on the bracket joints, effectively preventing the looseness of the bracket joints.



Contact Information

No.151,MidRoad,Zhifu,XiLi IndustrialPark,Yantai,China

+86 535 6736715


Useful links

Site map

Yantai Luxmain Car Lift Co., Ltd. products include:Movable Car Lift,Electric Car Lift,Off-road Car Lift,Two Post Car Lift,Single Post Car Lift,Single Post Hydraulic Lift,Hydraulic Inground Car Lift,One Post Car Washing Lift,Hydraulic Lifter,Heavy Truck Lift,Car Lift 2 Post


Quick Lift,Car Quick Lift,Home Garage Lift,Inground Lift,Portable Quick Lift,Mini Lift,Scissor Car Lift,Inground Car Lift
<cite id="1ffzp"></cite>
<var id="1ffzp"><noframes id="1ffzp">
<ins id="1ffzp"></ins>
<cite id="1ffzp"><noframes id="1ffzp">
<ins id="1ffzp"><noframes id="1ffzp"><ins id="1ffzp"></ins>
<ins id="1ffzp"><noframes id="1ffzp"><cite id="1ffzp"><span id="1ffzp"></span></cite>
<ins id="1ffzp"></ins>