Car Scissor Lift Operating Procedures

2019-04-11 18:31:15

The Car Scissor Lift is a versatile special equipment for aerial work. Its scissor mechanical structure makes the lifting platform have higher stability, wide working platform and high carrying capacity, which makes the working range of aerial work larger and suitable for multiple people to work at the same time. It makes work more efficient and safer.

The Double Level Scissor Car Lift for Wheel Alignment can only be operated by trained personnel.

The operator on the Car Scissor Lift must wear a seat belt. Before starting the operation, the legs should be leveled with the legs and the feet should be solid. The operator must concentrate and operate in the order of operations specified in the instruction manual. During the lifting process, the platform should be stable and flexible, and there should be no sudden jump or jamming. If the above phenomenon occurs, stop the inspection immediately and try to eliminate it before working. The hydraulic system should immediately stop the inspection if one of the following conditions occurs, and take measures to eliminate:

Abnormal noise; oil temperature rises rapidly; abnormal cylinder pressure and return pressure; oil leakage;

After pressing the "up" or "down" button, if the table is not moving, in addition to checking the hydraulic system, check the Hydraulic Scissor Design Car Lift for any stuck, whether the electrical part is broken or overloaded.